This post may contain affiliate links. As an Amazon Associate, we earn from qualifying purchases. View our full disclosure here.Â
Grinding is a simple job that can be done by anyone with the right tools. A lot of it depends on how good your grinder is, but if you use a Nutribullet, you won’t waste time or money.
We’re going to look at the Nutribullet in this article. You might drink coffee and be wondering if the Nutribullet can grind coffee.
Yes, you can grind coffee with the Nutribullet.
The Nutribullet can do more than just make your favorite smoothie or slushie. Depending on what you want, it can also make coarse or fine coffee. The Nutribullet is a versatile machine with two blades that can be switched out as needed. It has a blade for milling and a blade for pulling out.
The extractor has four prongs and is the tool used to make drinks from fruits and vegetables. The other one has two points and makes powder out of different foods.
So, when you grind, you should use the milling blade instead of the extractor.
The milling blade of the Nutribullet makes it easy to grind all kinds of coffee beans, whether they are light, medium, or dark roasted (with the last one being the hardest to grind).
On the other hand, the blades of the Nutribullet may not be the best type of grinder for all kinds of grinding.
For example, if you want to experiment with French roasts and other ways to make coffee, you’ll probably need to grind the coffee, which may be hard to get with a Nutribullet.
But, let’s go step-by-step.
How does a NutriBullet work?
The NutriBullet is not a juicer; it is a blender. This means that there will be a lot of pulp in what you are making. The NutriBullet is about 14 inches tall and weighs about seven pounds.
The original model comes with a 600-watt motor, one tall cup, a power base, one extractor blade, and a milling blade for dry ingredients like roasted coffee beans.
Related: How Does The Keurig Work And How To Use It
The main differences between a coffee grinder and a NutriBullet
The blender and the grinder are both home appliances that are used to mix food, but they do so in different ways.
People usually know that a grinder is used to make powder out of something. On the other hand, as its name suggests, a blender is used to mix two or more things together.
Yes, that’s right.
Here are the main differences:
- A coffee grinder is made to break up hard, dry things like roasted coffee beans, nuts, seeds, and grains. A blender, on the other hand, is mostly made to mix things together.
- Most coffee grinders have detachable grinding chambers that make it easy to pour out ground coffee and clean them, while most blenders have detachable pitchers that can hold food.
- Grinders usually have short pitchers, while blenders usually have long pitchers.
- Most coffee grinders have conical burrs, which are cooler and quieter. The NutriBullet, on the other hand, has flat burrs, which are loud and heat up quickly.
- Coffee grinders have more grinding settings than blenders.
How to crush coffee beans in a Nutribullet (step-by-step guide)?
- Step 1: For general instructions, consult the manual that came with your Nutri product. After unplugging the Nutribullet, replace the flat blade.
- Step 2: Purchase some high-quality coffee beans and inspect them for flaws that could spoil your favorite caffeinated beverage. We like the whole bean coffee grounds from Lavazza Super Crema.
- Step 3: Place the Nutribullet on a stable, flat surface.
- Step 4: Follow the directions to fill the container with coffee beans, and then seal it tightly. Then connect it to an outlet. Don’t put in too many coffee beans—100 g should be enough. If you’re using a stronger model, like the last two we mentioned, you can put a little more, but be careful not to overfill it.
- Step 5: Choose the speed if you’re using the third or fourth grinder on our list. If you have the original version or the pro version, you can’t change the speed.
- Step 6: If you have the original (or Pro) Nutribullet, you might be able to change the size of the grind by changing how long you grind it.
- Step 7: Let the blender stay on the power source for about ten seconds before turning it off. While the lid is still on, shake the container for about five seconds. As you shake it, the larger ground particles will fall to the bottom of the unit, closer to the base of the blade, while the smaller ones will rise above them.
- Step 8: After that, the Nutribullet can be unplugged from the power source. Pour the coffee beans that have been finely ground into a container to store.
Learn More: How To Use A Milk Frother
A Nutribullet can be used to grind different kinds of coffee beans
With a Nutribullet, you can use many different kinds of coffee beans and choose between different levels of grinding.
Before you do anything else, spend some time reading the user manual to get to know the machine. In the manual, you can find out how to put the blades inside the blender.
Make sure the connection is not in the wall socket as you do this. The Nutribullet is different from most blenders, which have a dial or a button to blend.
To start blending or grinding, you put the pitcher on the motor and press down on the pitcher. Instead of letting it run on its own, you pulse it when you want to grind or blend something quickly.
Pulse is when you turn it on and off quickly, every one to two seconds. By doing it this way, you can make sure that the coffee beans are ground evenly.
If you let it run for a long time, the coarse beans will stay on top and the finer ones will be at the bottom. This means that the texture of the coffee will be all over the place.
Coarse coffee
This is an easy job that only needs coffee beans and your Nutribullet.
Fill the pitcher with coffee beans until it is about three-quarters full. This is all you need to do to make coarse coffee.
This gives the blades enough room to spin around and gather all of the coffee beans. Then, put the pitcher on the motor and turn it on and off three times.
Medium coffee
Fill the pitcher three-quarters of the way with coffee beans, like you would when grinding coarse coffee, and then pulse it five times in one-second bursts. In the end, the coffee beans should be about the size of sand on a beach.
Fine coffee
Espresso is often made with fine coffee, either by hand or with a machine. To get this consistency, run the Nutribullet in 10-second bursts for about a minute or two.
Then, take the cup off of the base, give it a good shake between each interval, and make sure the lid is on tight.
You might see the bigger particles move down toward the blade, making room for the smaller ones to rise to the top.
Grind your coffee again for another 10–15 seconds. Do this again and again until your coffee is as smooth as you want it to be.
This should take no more than two minutes. So quickly, you have good coffee.
When you’re done, you can pour the ground coffee into a container for storage.
Put it somewhere cool and dry where you can keep it for later use. When you run out of coffee, you can quickly and easily grind more at home.
Extra-fine coffee
People also call this type of coffee grind “Turkish coffee grind” because it is mostly used to make Turkish coffee. It has a texture like flour or powdered sugar.
At least twice, for about 10 to 15 seconds each time, run the Nutribullet. Take the cup and shake it a little, as you would with fine coffee, to make sure the grounds are spread out evenly.
This gives the blades some room to spin and catch all the coffee beans. To get coarse coffee, put the pitcher on the motor and give it about three pulses.
Cleaning a NutriBullet
How hard is it, then, to clean a NutriBullet?
It’s pretty simple.
Things you need
- Detergent
- Water
- Kitchen sponge
- Kitchen brush
Directions
Start by taking the NutriBullet apart into its parts.
The milling blade is the first part you have to clean. Use a small amount of liquid detergent to clean the side with a flat blade on the inside. Rinse it with warm water and set it aside to dry.
Next, wash the cup. Put some detergent and lukewarm water in the cup and stir it around. Use a kitchen brush to get rid of any coffee deposits or stains.
The base of the NutriBullet is hard to clean, though, because you can’t put water on it. It’s the part where the motor goes.
Before you can clean the base, you have to disconnect it from the wall. Then, wipe the outside and inside of any coffee grounds with a damp sponge. Give the base a light scrub with a small brush dipped in warm, soapy water. Use a small brush to clean any ground coffee out of the levers. Push down on the actuators with a blunt object to get rid of any stuck-on debris.
Clean the power base with a dry towel. Before you use your power base again, you should always make sure it is completely dry.
A list of different Nutribullet products
Also, it’s important to know that Nutribullet makes a lot of different products, and here we’ll talk about how each one can grind coffee beans.
NutriBullet Original
This is the original model. If you’re a typical user, you won’t need more than the 600 watts of the original model. The blades can grind just about anything, but we don’t recommend trying it out.
This product is also the least expensive on the list. If you’re the kind of person who likes quick, good, cheap, and easy solutions, this is the real deal; you don’t need to look any further.
Pros
- More or less affordable
- Classic places to go
Cons
- It is the Nutribullet product with the weakest motor
NutriBullet Pro
To cut a long story short, this is the improved version of the first. Slightly.
You now have 300 more watts, giving you a total of 900 watts. This version is also better because it can hold 8 oz more than the last one. It also costs almost 50% more than the original Nutribullet, which isn’t really a good deal.
We think you should stick with the first model or think about getting some other models since the Pro didn’t live up to its name. There is only one thing good about Pro: it comes in many more colors.
Pros
- It has 300 more watts than the first NutriBullet
Cons
- It costs a lot more than the original version
NutriBullet RX N17-1001
Now we’re getting somewhere!
You could buy three standard versions for the price of one RX N17, but look at what you get: a motor with 1700 watts, a maximum capacity of 1 liter, SMART hands-free technology, and heating.
Even though we’re not sure if you really need a 1700-watt motor, the fact that the NutriBullet RX has one at least makes it worth the price.
Can this thing be used to grind coffee? Definitely.
Check the blades every so often to see if they are broken or anything like that.
It’s not that you can’t grind coffee beans with any of the other items on this list, but with the Nutribullet Rx, you don’t even have to think twice or worry about what will happen. The motor on this coffee grinder/blender is the strongest of all the blenders on this list.
Pros
- It is equipped with the most powerful engine
- It has more room than the previous two models
Cons
- Is quite expensive
NutriBullet ZNBF30500Z Blender Combo
Blender Combo is an interesting product.
Compared to the NutriBullet RX, it has a weaker motor, but it can hold more. It’s the most versatile product on this list.
It has different speeds, which might help you get different types of coffee grinds, but you might have to experiment a bit.
It’s not quite a burr grinder, but it will get the job done.
Pros
- Can carry the most
- Strong motor
- Versatile
Cons
- Is quite expensive
Frequently asked questions
Definitely, especially if you choose stronger models. The most important thing is to keep an eye on how your blades are doing. Neither the NutriBullet nor the Magi Bullet blender/grinder were made to grind coffee beans, so as long as you take care of this, you should be good to go.
I think that you should go with RX N17. Yes, it costs a lot, but it will do the job. You can also use it to grind nuts, dry fruit, and other hard foods. These foods, like coffee beans, put a lot of stress on your grinder’s blade, so it’s good to have the extra power that NutriBullet RX gives you.
I think that the smaller cups give you more control over this task.
So fewer beans have less room to move before they hit the blades.
With a larger Nutribullet cup, it’s even more difficult to get everything to be exactly the same. This is because the beans at the top of the cup have to get to the bottom, and the same is true for the beans at the bottom of the cup. Smaller amounts of coffee beans are much easier to work with.
The Nutribullet is also very cheap, has a lot of power, and is easy to use to grind coffee. It can run with a motor speed of 600 watts and a high torque power of 300 lbs.
Traditional blenders have speeds that can be changed, but the base models don’t. Instead, they are controlled by pulse controls. Now you just have to turn the cup in place.
It doesn’t make any noise when you grind it. It’s portable and weighs about 7.4 pounds less than other food extractors on the market, so you can make coffee while you’re out and about.
A small amount can be ground, but it shouldn’t be less than half a cup. For the best grinding results, fill the cup about 3/4 of the way.
This is not easy. We’ve already said that it might take a lot of practice to learn how to grind on this kind of product. So, maybe that is the right answer to this question.
Yes, even the ones that are stronger.
Not even close. The max fill line is there to keep you from filling it too much, which would make mixing less effective.
Some people have loaded the raw materials past the maximum fill line more than once with no problems, so you can mix whatever amount works for you. But it’s best to stay under the advised limit.
With the basic Nutribullet 600, you get two blades (an extraction blade and a milling blade). Since the milling blade isn’t needed, the more powerful ones will come with the extraction blade.
The four-prong extraction blade is for blending, but you can use it for anything else.
The two-pronged milling blade is used to grind dry things like flour, nuts, spices, and herbs. It makes nut butter as well.
You can use a regular food blender to grind roasted coffee beans. But the problem is that you can only grind small amounts at a time. Pulse the coffee beans at about half speed. The coffee ground by a food blender, on the other hand, is more coarse and works well for cold brew, French press, and drip coffee.
The tall and short cups, blades, and lip rings can all be cleaned in the dishwasher. But you can’t put the power base in the dishwasher.
No, the milling blade only works with NutriBullet.
Conclusion
Can coffee beans be ground in a NutriBullet?
Yes, you can.
The NutriBullet is a special kind of blender that lets you do that. This tool is made to do more than just blend food for smoothies. It is also made to grind dry ingredients.
Because of this, it can grind roasted coffee beans. Not only that, but you can get different grind levels by changing how long you pulse. The easiest to make with just a few pulses is coarsely ground coffee, followed by medium-ground and finely ground.
So, you can always use your NutriBullet if you don’t have a coffee grinder.